Really enjoy the pictures and the high resolution captures. Learning a lot. I guessed the c field was the bottom coil and the small coil in the bean was the LF coil. But it clearly explains the low z of the LF coil. Boy thats about a direct short. :-) With respect to the C Field Toms pix help make more sense of the wiring. Regards Paul WB8TSL
On Sun, Feb 19, 2017 at 7:38 AM, Richard (Rick) Karlquist < [email protected]> wrote: > > > On 2/18/2017 7:43 PM, Tom Van Baak wrote: > >> Unless yours is a high-perf 5061 tube I wonder if the degaussing coil >> even exists. Did you pull it from an option /004 frame? Check if there's a >> separate pair of degaussing wires coming from the tube and heading to the >> rear panel of the instrument. That would make a total of 6 coil wires. >> >> Corby will know all of this for sure. >> >> /tvb >> >> > I remember that the degausser product that drove the > degaussing coil was a very low priority because Len > Cutler et al insisted that it was unnecessary to > degauss the CBT, at least in the 5071A. It finally > got produced just to satisfy a few customers who > believed they wanted it. > > Rick > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/m > ailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
