Bob,
I would be interested in 4 Furuno GT-8736 boards if you order.
Mike
On Thu, Feb 15, 2018 at 01:55 PM, Bob Darlington wrote:
I bought some of the Furuno GT-8736 boards for $35 a pop, qty 1 (or 2
as
was the case). And was quoted at $26.91 a pop if I buy 100. If
there's
interest, I'm happy to coordinate a group buy at cost. Just paid off
that
credit card yesterday so why not? If there are more desirable boards
from
Furuno, let me know and I'll see what I can do.
-Bob
On Thu, Feb 15, 2018 at 3:59 AM, ew via time-nuts wrote:
Talking about Furuno has any one looked at the GT-87. I have known
about
it for years but found no way to buy some now DigiKey has them for $
100,
Buerklin in Germany for half that price. Saw tooth is +- 1.7 nsec we
are
not going to bother with correction. We are in the process to lay out
a
board any recommendations are appreciated
Bert Kehren
In a message dated 2/15/2018 12:39:48 AM Eastern Standard Time,
[email protected] writes:
I just did a small adapter board that converts the 2x5 pin 2mm
header on
the Furuno GT-8031 to a 1x9 pin 0.1" connector with the pinouts of
the
Adafruit Ultimate GPS. There a couple of minor pin differences... the
Adafruit FIX pin is not used and the Adafriuit 3.3VREG output pin is
used
as the Furuno antenna power connection. The Furuno can be soldered to
the
board or a female connector could be installed.
I'm getting ready to order a few boards. If interested, contact me
off
list._______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/
mailman/listinfo/time-nuts
and follow the instructions there.
1 Attached Images
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/
mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
