What do you mean by “Adafruit” pinout? On Fri, Feb 16, 2018 at 11:50 AM Mark Sims <[email protected]> wrote:
> No, the Tbolt does not have a separate receiver board... plus its' GPS is > rather special... the RF chain is locked to the OCXO so it does not produce > any sawtooth error. > > The Lucent KS firmware expects the GPS to support the older 6/8 channel > messages. The newer 12 channel messages are different. > > BTW, I just did a Motorola M12 to Adafruit pinout board. The M12 form > factor and pinouts are also used by a lot of other timing receivers. Why > Adafruit? Because it is breadboard friendly, has enough pins for all the > signals that one expects, and my GPS to RS-232 adapter board has an > Adafruit connector on it. > > ---------------- > > > Never having opened my TBolt, are the GT-8736 boards of use to replace > the aging and partly deaf receiver in that? Or for a KS-24019? > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
