The TICC uses an Arduino mega clone, not a Raspberry Pi. My understanding is that most of the magic happens on the shield board not in the processor - the processor is just there to capture the data from the shield and format and report it via the serial port.
On Wed, Aug 14, 2019 at 12:10 PM Perry Sandeen via time-nuts < time-nuts@lists.febo.com> wrote: > Yo Bubba Dudes!, > I've just purchased a TAPR TIC module. Now the new Raspberry Pi Model B > has just been released. > So my question is would there be any worthwhile advantage to replacing the > TAPR unit with the new Model 4B? > Regards, > Perrier > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > -- - Forrest _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.