Hi Could you? Sure you could.
Should you? How much do you feel like rewriting all the driver software from scratch? Do you really want to rewire things to fit to the Raspberry pinout? That’s either a fairly simple PCB or a whole bunch of wires. The main benefits would be the bigger RAM on the 4B and the ethernet port. If you went crazy, you could put a display and buttons on it and have an “all in one” instrument. Probably easier to leave the Arduino where it is and mate up the 4B with the serial port on the Arduino. Bob > On Aug 14, 2019, at 1:28 PM, Perry Sandeen via time-nuts > <[email protected]> wrote: > > Yo Bubba Dudes!, > I've just purchased a TAPR TIC module. Now the new Raspberry Pi Model B has > just been released. > So my question is would there be any worthwhile advantage to replacing the > TAPR unit with the new Model 4B? > Regards, > Perrier > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.
