Probably only worth the effort if one were considering a higher resolution device intended to surpass that of the venerable HP5370A/B or equivalent. Doable with off the TDC shelf parts but is there any demand?
Bruce > On 15 August 2019 at 11:18 John Ackermann N8UR <j...@febo.com> wrote: > > > In theory, making a new TICC that ran on an RPi could provide > significantly more measurements per second, and more convenient I/O, but > wouldn't affect the quality of the results. > > I've thought a bit about an RPi-based TICC, but it's a significant > redesign effort for limited gains. > > John > ---- > > On 8/14/19 3:18 PM, Forrest Christian (List Account) wrote: > > The TICC uses an Arduino mega clone, not a Raspberry Pi. > > > > My understanding is that most of the magic happens on the shield board not > > in the processor - the processor is just there to capture the data from the > > shield and format and report it via the serial port. > > > > On Wed, Aug 14, 2019 at 12:10 PM Perry Sandeen via time-nuts < > > time-nuts@lists.febo.com> wrote: > > > >> Yo Bubba Dudes!, > >> I've just purchased a TAPR TIC module. Now the new Raspberry Pi Model B > >> has just been released. > >> So my question is would there be any worthwhile advantage to replacing the > >> TAPR unit with the new Model 4B? > >> Regards, > >> Perrier > >> _______________________________________________ > >> time-nuts mailing list -- time-nuts@lists.febo.com > >> To unsubscribe, go to > >> http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > >> and follow the instructions there. > >> > > > > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.