Would require a real time operating system on the Pi?
On 2019-08-14 16:16, Bob kb8tq wrote:
Hi
Could you? Sure you could.
Should you? How much do you feel like rewriting all the driver
software from scratch?
Do you really want to rewire things to fit to the Raspberry pinout?
That’s either a fairly
simple PCB or a whole bunch of wires.
The main benefits would be the bigger RAM on the 4B and the ethernet
port. If you went
crazy, you could put a display and buttons on it and have an “all in
one” instrument.
Probably easier to leave the Arduino where it is and mate up the 4B
with the serial port
on the Arduino.
Bob
On Aug 14, 2019, at 1:28 PM, Perry Sandeen via time-nuts
<time-nuts@lists.febo.com> wrote:
Yo Bubba Dudes!,
I've just purchased a TAPR TIC module. Now the new Raspberry Pi Model
B has just been released.
So my question is would there be any worthwhile advantage to replacing
the TAPR unit with the new Model 4B?
Regards,
Perrier
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
--
Dr. Don Latham AJ7LL
PO Box 404, Frenchtown, MT, 59834
VOX: 406-626-4304
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
