On 9/12/07, Rob Janssen <[EMAIL PROTECTED]> wrote: > hans schreef: > > > > Thomsom ST 780 is restricted to 1000 open connections, not enough for a > > pool server. > > > > > I agree. Older SpeedTouch models could use the "SIP Spoof" method of > transparent ethernet-to-PPPoA bridging which works fine. I use one here. > > New SpeedTouch firmware like in the ST 780 always has the NAT module > inline even when you use the "assign external address to internal > system" functionality, and the NAT module has some kind of leak. It > always breaks down after some time of operation, dropping existing > translations. > > Those modems are no longer usable. I tried to report it to their > helpdesk but although they seem to be helpful at first, nothing finally > happened with my request to get the old transparent mode back, and the > problems with the NAT were not really acknowledged. > (although they are very apparent) > On qwat page should this information be located on the project wiki? I know of one router that cannot be used (the Microsoft-branded wireless broadband router, which is no longer made).
-- RPM _______________________________________________ timekeepers mailing list [email protected] https://fortytwo.ch/mailman/cgi-bin/listinfo/timekeepers
