Moteworks is based on some mystery version of T1 and includes most of the dev tree, but not the doc tree which is the only indicator of actual version that I've uncovered. I'm not sure what you mean about iris using motelist commands, did you try that program with your micas to no effect?
MS BAI LI wrote: > Hi, > > I never use moteworks. I heard moteworks only supports tinyos1.x not > 2.1. But it is interesting iris can use motelist command not micaz. > > Regards, > Bai > > On Fri, Sep 11, 2009 at 1:55 AM, Michael Schippling <[email protected] > <mailto:[email protected]>> wrote: > > Just for grins, try this one. It came with Moteworks and > seems to work with Iris boards attached via MIB520: > http://www.etantdonnes.com/Motes/motelist.exe.moteworks > > I need to figure out how it works eventually anyway... > I can poet the source as well if it helps, or you can d/l > Moteworks from Xbow's site. > > MS > > > > Razvan Musaloiu-E. wrote: > > Hi! > > On Thu, 10 Sep 2009, BAI LI wrote: > > Hi, > > Thanks for your reply. > > Yes. I am using MIB520 as well. But i just can't work it > out. So if anyone > in this list try motelist command with micaz platform. > please let me know. > > > I just tried a MIB520 and the motelist doesn't show it. As far > as I know the motelist is only for the telos family of motes. > > -- > Razvan ME > > On Thu, Sep 10, 2009 at 1:57 AM, Michael Schippling > <[email protected] <mailto:[email protected]>>wrote: > > To my knowledge motelist only works with USB attached > devices. > If you have a MIB520 it might work with mica's, but I've > only > tried it with the Iris and then only the motelist > version that > came with Xbow's Moteworks. I don't know if it's different > from the standard one. > MS > > > BAI LI wrote: > > Hi, > Recently I tested my code on micaz. When I typed > motelist commande, It > said no device found. But I am able to compile and > burn the code on micaz. > The mote works fine. When i pluged the telosb node > back to the pc, it can > display the COM# properly. I have searched the > keyword motelist, i can find > motelist under /tools/platforms/msp430/motelist. I > don't know what to do > since there is no errors poped up. Am I supposed to > recompile the TOOLS > folder since there is no micaz folder there? Could > someone give me some > possible directions please? Thanks. > Regards, > Bai > > > > ------------------------------------------------------------------------ > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > <mailto:[email protected]> > > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > > > > _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
