The telos has a slightly different FTDI chip than the MIB520, that's why the motelist that comes with T2 does not recognize the latter. I have a version in tinyos-2.x-contrib (/vu/tools/platforms/iris/motelist) that should work with both.
http://tinyos.cvs.sourceforge.net/viewvc/*checkout*/tinyos/tinyos-2.x-contrib/vu/tools/platforms/iris/motelist?revision=1.1 Janos On Mon, Sep 14, 2009 at 6:16 PM, BAI LI <[email protected]> wrote: > Hi, > > Have you actually tried motelist command on Micaz platform? And i am using > TinyOS 2.1 not moteworks. I have tried and failed it. So i am not too sure > what I missed? > > Regards, > Bai > > On Tue, Sep 15, 2009 at 3:18 AM, Giri Baleri <[email protected]> wrote: > >> Motelist has nothing to do with the radio platform you are using. This >> command looks at the FTDI USB chip (resident on TelosB and MIB520) driver >> and reports the virtual COM ports found. If you are using MIB520 as a >> programming board, then it should report the COM ports assigned to it. >> >> >> >> Giri >> >> >> ------------------------------ >> >> *From:* [email protected] [mailto: >> [email protected]] *On Behalf Of *BAI LI >> *Sent:* Friday, September 11, 2009 5:31 PM >> *To:* Michael Schippling >> *Cc:* Tinyos-Help >> *Subject:* Re: [Tinyos-help] motelist doesn't work >> >> >> >> Hi, >> >> >> >> I didn't use moteworks as my project is based on Tinyos2.1. But i read a >> post somewhere in this list the motelist command works on Iris nodes not >> only telosb. It can display the COM number. So i thought the motelist >> command is supposed to work on micaz as well. In fact I found "no device >> found". But anyways I will go to Device Manager to check out the port number >> if necessary. >> >> >> >> Regards, >> >> Bai >> >> On Sat, Sep 12, 2009 at 3:06 AM, Michael Schippling <[email protected]> >> wrote: >> >> Moteworks is based on some mystery version of T1 and includes >> most of the dev tree, but not the doc tree which is the only >> indicator of actual version that I've uncovered. I'm not sure >> what you mean about iris using motelist commands, did you try >> that program with your micas to no effect? >> >> MS >> >> >> BAI LI wrote: >> >> Hi, >> >> >> I never use moteworks. I heard moteworks only supports tinyos1.x not 2.1. >> But it is interesting iris can use motelist command not micaz. >> Regards, >> Bai >> >> On Fri, Sep 11, 2009 at 1:55 AM, Michael Schippling >> <[email protected]<mailto: >> [email protected]>> wrote: >> >> Just for grins, try this one. It came with Moteworks and >> seems to work with Iris boards attached via MIB520: >> http://www.etantdonnes.com/Motes/motelist.exe.moteworks >> >> I need to figure out how it works eventually anyway... >> I can poet the source as well if it helps, or you can d/l >> Moteworks from Xbow's site. >> >> MS >> >> >> >> Razvan Musaloiu-E. wrote: >> >> Hi! >> >> On Thu, 10 Sep 2009, BAI LI wrote: >> >> Hi, >> >> Thanks for your reply. >> >> Yes. I am using MIB520 as well. But i just can't work it >> out. So if anyone >> in this list try motelist command with micaz platform. >> please let me know. >> >> >> I just tried a MIB520 and the motelist doesn't show it. As far >> as I know the motelist is only for the telos family of motes. >> >> -- Razvan ME >> >> On Thu, Sep 10, 2009 at 1:57 AM, Michael Schippling >> >> <[email protected] <mailto:[email protected]>>wrote: >> >> >> >> To my knowledge motelist only works with USB attached >> devices. >> If you have a MIB520 it might work with mica's, but I've >> only >> tried it with the Iris and then only the motelist >> version that >> came with Xbow's Moteworks. I don't know if it's different >> from the standard one. >> MS >> >> >> BAI LI wrote: >> >> Hi, >> Recently I tested my code on micaz. When I typed >> motelist commande, It >> said no device found. But I am able to compile and >> burn the code on micaz. >> The mote works fine. When i pluged the telosb node >> back to the pc, it can >> display the COM# properly. I have searched the >> keyword motelist, i can find >> motelist under /tools/platforms/msp430/motelist. I >> don't know what to do >> since there is no errors poped up. Am I supposed to >> recompile the TOOLS >> folder since there is no micaz folder there? Could >> someone give me some >> possible directions please? Thanks. >> Regards, >> Bai >> >> >> >> ------------------------------------------------------------------------ >> >> >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> >> <mailto:[email protected]> >> >> >> >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> >> >> >> >> >> > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
