Hi,

Have you actually tried motelist command on Micaz platform? And i am using
TinyOS 2.1 not moteworks. I have tried and failed it. So i am not too sure
what I missed?

Regards,
Bai

On Tue, Sep 15, 2009 at 3:18 AM, Giri Baleri <[email protected]> wrote:

>  Motelist has nothing to do with the radio platform you are using. This
> command looks at the FTDI USB chip (resident on TelosB and MIB520) driver
> and reports the virtual COM ports found. If you are using MIB520 as a
> programming board, then it should report the COM ports assigned to it.
>
>
>
> Giri
>
>
>  ------------------------------
>
> *From:* [email protected] [mailto:
> [email protected]] *On Behalf Of *BAI LI
> *Sent:* Friday, September 11, 2009 5:31 PM
> *To:* Michael Schippling
> *Cc:* Tinyos-Help
> *Subject:* Re: [Tinyos-help] motelist doesn't work
>
>
>
> Hi,
>
>
>
> I didn't use moteworks as my project is based on Tinyos2.1. But i read a
> post somewhere in this list  the motelist command works on Iris nodes not
> only telosb. It can display the COM number. So i thought the motelist
> command is supposed to work on micaz as well. In fact I found "no device
> found". But anyways I will go to Device Manager to check out the port number
> if necessary.
>
>
>
> Regards,
>
> Bai
>
> On Sat, Sep 12, 2009 at 3:06 AM, Michael Schippling <[email protected]>
> wrote:
>
> Moteworks is based on some mystery version of T1 and includes
> most of the dev tree, but not the doc tree which is the only
> indicator of actual version that I've uncovered. I'm not sure
> what you mean about iris using motelist commands, did you try
> that program with your micas to no effect?
>
> MS
>
>
> BAI LI wrote:
>
> Hi,
>
>
>  I never use moteworks. I heard moteworks only supports tinyos1.x not 2.1.
> But it is interesting iris can use motelist command not micaz.
>  Regards,
> Bai
>
> On Fri, Sep 11, 2009 at 1:55 AM, Michael Schippling <[email protected]<mailto:
> [email protected]>> wrote:
>
>    Just for grins, try this one. It came with Moteworks and
>    seems to work with Iris boards attached via MIB520:
>       http://www.etantdonnes.com/Motes/motelist.exe.moteworks
>
>    I need to figure out how it works eventually anyway...
>    I can poet the source as well if it helps, or you can d/l
>    Moteworks from Xbow's site.
>
>    MS
>
>
>
>    Razvan Musaloiu-E. wrote:
>
>        Hi!
>
>        On Thu, 10 Sep 2009, BAI LI wrote:
>
>            Hi,
>
>            Thanks for your reply.
>
>            Yes. I am using MIB520 as well. But i just can't work it
>            out. So if anyone
>            in this list try motelist command with micaz platform.
>            please let me know.
>
>
>        I just tried a MIB520 and the motelist doesn't show it. As far
>        as I know the motelist is only for the telos family of motes.
>
>        --        Razvan ME
>
>            On Thu, Sep 10, 2009 at 1:57 AM, Michael Schippling
>
>            <[email protected] <mailto:[email protected]>>wrote:
>
>
>
>                To my knowledge motelist only works with USB attached
>                devices.
>                If you have a MIB520 it might work with mica's, but I've
>                only
>                tried it with the Iris and then only the motelist
>                version that
>                came with Xbow's Moteworks. I don't know if it's different
>                from the standard one.
>                MS
>
>
>                BAI LI wrote:
>
>                     Hi,
>                     Recently I tested my code on micaz. When I typed
>                    motelist commande, It
>                    said no device found. But I am able to compile and
>                    burn the code on micaz.
>                    The mote works fine. When i pluged the telosb node
>                    back to the pc, it can
>                    display the COM# properly. I have searched the
>                    keyword motelist, i can find
>                    motelist under /tools/platforms/msp430/motelist. I
>                    don't know what to do
>                    since there is no errors poped up. Am I supposed to
>                    recompile the TOOLS
>                    folder since there is no micaz folder there? Could
>                    someone give me some
>                    possible directions please? Thanks.
>                     Regards,
>                    Bai
>
>
>
>  ------------------------------------------------------------------------
>
>
>                    _______________________________________________
>                    Tinyos-help mailing list
>                    [email protected]
>
>                    <mailto:[email protected]>
>
>
>
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>
>
>
>
>
>
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

Reply via email to