Hi Michael. Michael Schippling ha scritto: > Are you sure you are connecting the pot correctly?
Yes, I'm sure. I connect an external pin of the pot to the Iris VCC, another external pin to the GND and the central pin to the ADC1 channel. > Something like a 10K pot between +battery and ground > with the center wiper attached to _only_ the single > input pin, right? Right. > Also note that channel 0 is (on other mica type devices) > the RSSI input from the radio, so it's probably not > available for use. I believe voltageC is attached to > channel 7, so it's out of the loop too. I also use channel 1, but the result is the same. > My break-out-board just brings all the connector pins to > a convenient connection point, unless the traces are shorted > or something... > > MS Yes. My break-out board connect only VCC, ADC Channel 1 and Ground. It is this: http://tinyurl.com/4nopz3f (red is VCC, blue is ADC Channel and black is GND) Greetings, -- Francesco Ficarola <francesco.ficarola_at_gmail_dot_com> [GPG KeyID: 0xDBA99D92]
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
