Michael Schippling ha scritto: > Well, that photo is not very informative...
Probably this photo is more informative: http://img683.imageshack.us/img683/2381/breakoutboardmini.jpg > and I notice that it's not actually my break-out board... No, it's not your bob, in fact I wrote that it is similar, not the same. :) > how do you have the connector mounted on that perf-board? Yes, Hirose DF9-51 pin > Are you sure you haven't shorted contacts on the connector? No, I tested it with a multimeter. > If you are able to read the sensor-board Photo/Temp on ADC1 > then I think there must be a connection issue with your BOB. What? I do not understand what you mean. > Another thing to try, if you have a steady hand, is just > solder a wire (tiny wire-wrap wire has worked for me) to > a spare mating connector at -- I think -- pin 42 and run > that to your pot center. > > good luck > MS I'll try it, thanks. Greetings, -- Francesco Ficarola <francesco.ficarola_at_gmail_dot_com> [GPG KeyID: 0xDBA99D92]
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
