Bill raises a good point.  If your neighbors are on the same wireless channel 
you are then your data transfers won't be as fast.  You can try different 
channels to see if there is an improvement.  The best channels (due to less 
overlap) tend to be 1, 6, and 11.

To use wired network connectivity without having to pull Ethernet cables, 
Powerline is another option.  It utilizes network adapters you plug into your 
power sockets and use your existing wiring.





________________________________
From: Bill Kearney <[email protected]>
To: [email protected]
Sent: Mon, April 5, 2010 9:02:06 AM
Subject: Re: [TiVo Central] Re: Slow Transfers and transfering between series 2 
and 3

  

And consider that someone else nearby may also be running wifi.  Too many 
devices or networks in a given area can degrade performance quite a lot.

The antennas generally work by radiating a round pattern.  Think of a 
doughnut, spreading out from around the pole of the antenna.  You want to 
make sure your antennas are lined up to make that doughnut radiating pattern 
overlap.  If the devices are all on the same floor of the house then the 
antennas would be vertical.  But if they're on different floors then they'd 
need to be pointed in a way that best lines up.  It may require reposition 
both the antennas and the base station, perhaps even moving them to a better 
location entirely.  For USB connections you can use up to a 15ft extension 
cable and not degrade the USB performance.

Our 1950's era house is notorious for blocking all sorts of wireless 
traffic.  It's a problem just getting wifi to spread between the floors.  I 
had to resort to using a second access point in the attic in order to get 
enough coverage upstairs.

As has been suggestion, REALLY look into pulling wire.  Wireless is not a 
good solution for bulk traffic transfers like movies.  It's just not suited 
for it.  Web surfing, e-mail, sure.  But not for pulling a virtual freight 
train of data from one box to another.  Wire is cheap and installing is 
actually not all that difficult.  And sometimes a lot cheaper that you might 
expect, ask a local electrician for a quote.  They've already got the tools 
and pulling CAT5 wire is a LOT easier for them than electrical wire.

-Bill Kearney

> Your bedroom TiVo is the common denominator here, and it's most likely a 
> signal strength issue.  Go Messages & Settings, and then Network & Phone 
> (this is from my memory on my series 2) and see what percentage it reports 
> for the signal.  Probably your bedroom TiVo is getting a weaker connection 
> to your wireless router than your daughter's or the living room units.
>
> You can play around with the placement of your wireless adapter to see if 
> you can get a better signal.  If you've not lifted the top of your 
> wireless adapters you should.  There is an antenna there, and it works 
> best when pointed straight up.
>
> Distance, number of walls and their composition all degrade wireless 
> signals.  If you can't get a better signal and really want to speed up the 
> copies your other options are to move your router closer, or switch one or 
> more of your TiVos to wired connections.  Though not as convenient, wired 
> connections will be much faster than wireless.


 


      

[Non-text portions of this message have been removed]

Reply via email to