Thanks for the great replies - what Jeremy wrote makes sense...
The tivo in the living room is directly above my daughter's room in the 
basement while my bedroom is onthe same flor - but down the hall and around the 
corner and we are all three generally on laptops while watching tivo and I know 
the neighbor has wireless so it is probably interference - I will try running a 
cable and seeing if that makes a difference.

Now does any one have an answer on if I reconnect my lifetime series two can I 
transefer from a Series 3 to a series 2????

--- In [email protected], Jeremy Sullivan <jersu...@...> wrote:
>
> Bill raises a good point.  If your neighbors are on the same wireless channel 
> you are then your data transfers won't be as fast.  You can try different 
> channels to see if there is an improvement.  The best channels (due to less 
> overlap) tend to be 1, 6, and 11.
> 
> To use wired network connectivity without having to pull Ethernet cables, 
> Powerline is another option.  It utilizes network adapters you plug into your 
> power sockets and use your existing wiring.
> 
> 
> 
> 
> 
> ________________________________
> From: Bill Kearney <wkearne...@...>
> To: [email protected]
> Sent: Mon, April 5, 2010 9:02:06 AM
> Subject: Re: [TiVo Central] Re: Slow Transfers and transfering between series 
> 2 and 3
> 
>   
> 
> And consider that someone else nearby may also be running wifi.  Too many 
> devices or networks in a given area can degrade performance quite a lot.
> 
> The antennas generally work by radiating a round pattern.  Think of a 
> doughnut, spreading out from around the pole of the antenna.  You want to 
> make sure your antennas are lined up to make that doughnut radiating pattern 
> overlap.  If the devices are all on the same floor of the house then the 
> antennas would be vertical.  But if they're on different floors then they'd 
> need to be pointed in a way that best lines up.  It may require reposition 
> both the antennas and the base station, perhaps even moving them to a better 
> location entirely.  For USB connections you can use up to a 15ft extension 
> cable and not degrade the USB performance.
> 
> Our 1950's era house is notorious for blocking all sorts of wireless 
> traffic.  It's a problem just getting wifi to spread between the floors.  I 
> had to resort to using a second access point in the attic in order to get 
> enough coverage upstairs.
> 
> As has been suggestion, REALLY look into pulling wire.  Wireless is not a 
> good solution for bulk traffic transfers like movies.  It's just not suited 
> for it.  Web surfing, e-mail, sure.  But not for pulling a virtual freight 
> train of data from one box to another.  Wire is cheap and installing is 
> actually not all that difficult.  And sometimes a lot cheaper that you might 
> expect, ask a local electrician for a quote.  They've already got the tools 
> and pulling CAT5 wire is a LOT easier for them than electrical wire.
> 
> -Bill Kearney
> 
> > Your bedroom TiVo is the common denominator here, and it's most likely a 
> > signal strength issue.  Go Messages & Settings, and then Network & Phone 
> > (this is from my memory on my series 2) and see what percentage it reports 
> > for the signal.  Probably your bedroom TiVo is getting a weaker connection 
> > to your wireless router than your daughter's or the living room units.
> >
> > You can play around with the placement of your wireless adapter to see if 
> > you can get a better signal.  If you've not lifted the top of your 
> > wireless adapters you should.  There is an antenna there, and it works 
> > best when pointed straight up.
> >
> > Distance, number of walls and their composition all degrade wireless 
> > signals.  If you can't get a better signal and really want to speed up the 
> > copies your other options are to move your router closer, or switch one or 
> > more of your TiVos to wired connections.  Though not as convenient, wired 
> > connections will be much faster than wireless.
> 
> 
>  
> 
> 
>       
> 
> [Non-text portions of this message have been removed]
>


Reply via email to