Just make the anonymous entry load ide_cs, this might be a case where youc
an get it working without diagnosing why it is broken... -Tom
On Tue, 26 Jun 2001, Tilman Schoop wrote:
> Date: Tue, 26 Jun 2001 08:48:12 +0200
> From: Tilman Schoop <[EMAIL PROTECTED]>
> To: Tom Oehser <[EMAIL PROTECTED]>
> Cc: [EMAIL PROTECTED]
> Subject: Re: [tomsrtbt] Q: howto include ide_cs in tomsrtbt
>
> ok, I now have concentrated in the config file. on my suse system the
> card is accepted with the entry:
> card "ATA/IDE Fixed Disk"
> function fixed_disk
> bind "ide_cs"
>
> But the cardmgr from tomsrtbt now says:
> unsupported card in socket 1
> no product info available
>
> (I have disabled the "Anonymous Memory" entry, in order not to load
> memory_cs.o).
> why can`t he read the cis information? :-(
>
> Has anyone a running configuration for such a card.
>
> Any help appreciated
>
> Tilman
>
>
> Tom Oehser wrote:
> >
> > This sounds like a problem with the pcmcia config file, I would take a
> > look at that section from a newer pcmcia distribution and just edit the
> > stuff it uses to decide what kind of pcmcia card in inserted, it will
> > probably work fine once you change pcmcia options to try it as an IDE
> > instead of a memory card. Almost certainly there is no kernel issue.
> >
> > -Tom
> >
> > On Mon, 25 Jun 2001, Tilman Schoop wrote:
> >
> > > Date: Mon, 25 Jun 2001 16:58:31 +0200
> > > From: Tilman Schoop <[EMAIL PROTECTED]>
> > > To: [EMAIL PROTECTED]
> > > Subject: [tomsrtbt] Q: howto include ide_cs in tomsrtbt
> > >
> > > Hi all,
> > >
> > > I`m new to tomsrtbt and also new in this list.
> > > Now I have a problem setting up pcmcia to use ide_cs,
> > > in order to access a flash disk SanDisk 192 MB.
> > >
> > > I took ide_cs.o and pcmcia_full_config. With the
> > > last file I replaced the config file in /etc/pcmcia.
> > > I added a ide and ide.opts file also.
> > >
> > > But when the system boots (or when I insert the
> > > flash disk card), the cardmgr recognizes a memory
> > > card (socket 1: Anonymous Memory), wants to load
> > > memory_cs.o and if he finds it, wants to start
> > > the memory class init script for mem0 device.
> > >
> > > Is it possible at all with the kernel 2.0.39,
> > > provided with tomsrtbt-1.7.361? or do i have
> > > to replace the kernel, too?
> > > (I see that CONFIG_BLK_DEV_IDE_PCMCIA=y is set
> > > in kernel.config.bz2).
> > > What else do I miss in my configuration?
> > >
> > > Thanks in advance
> > >
> > > Tilman
> > >
> > >
> > > Tilman Schoop
> > > DSA, Daten- und Systemtechnik GmbH
> > > email: [EMAIL PROTECTED]
> > >
>
