Cool, ok! Thanks guys. So I just plug PC to port 1, Touch to port 2 and Transporter to 3?
So if I hook a switch between my PC and Touch today do I just keep the same settings that I have already put into place? Current settings: On my Windows 7, I went to Local Area Connection Properties. I double clicked on TCP/IPv4. I selected: 'Use the following IP address' and changed the IP address to 192.168.1.100. (for the last number stay in the 100 area) Subnet mask: 255.255.255.0 (defaults to this). On the SBT side of things... When choosing a network, choose ethernet. When it can't find anything, it will ask you to configure manually. For IP address, type: 192.168.1.102 (101 should work too but I put 102...Don't put 100 like the PC is setup for). Everything else it asks for is default. Now it will access the ethernet. Once this happens you get two options. One is to setup the network again (you don't want to do that) and the second option is: "Add new library". Select this. Then add the IP address of the PC (Not the SBT). In my case 192.168.1.100. ------------------------------------------------------------------------ Fizbin's Profile: http://forums.slimdevices.com/member.php?userid=58734 View this thread: http://forums.slimdevices.com/showthread.php?t=101778 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
