Smart phones? What are those? But seriously, I hate cell phones. I have a basic cell for emergency use only and that's it. :) Yes I'm very old school.
In any case, I got it to work in only ten minutes after hooking up the crossover cable. I haven't turned my receiver on yet but I played the files, etc, and everything worked the same as when I was using the TinySBS via my SD Cards. For future reference, in case someone wants to do what I did... On my Windows 7, I went to Local Area Connection Properties. I double clicked on TCP/IPv4. I selected: 'Use the following IP address' and changed the IP address to 192.168.1.100. (for the last number stay in the 100 area) Subnet mask: 255.255.255.0 (defaults to this). On the SBT side of things... When choosing a network, choose ethernet. When it can't find anything, it will ask you to configure manually. For IP address, type: 192.168.1.102 (101 should work too but I put 102...Don't put 100 like the PC is setup for). Everything else it asks for is default. Now it will access the ethernet. Once this happens you get two options. One is to setup the network again (you don't want to do that) and the second option is: "Add new library". Click this. Then add the IP address of the PC (Not the SBT). In my case 192.168.1.100. Boom, it should connect. Tonight I'm going to unplug my SBT as it looks like it could storm out. I hope I don't have to do this again when I turn it back on. ------------------------------------------------------------------------ Fizbin's Profile: http://forums.slimdevices.com/member.php?userid=58734 View this thread: http://forums.slimdevices.com/showthread.php?t=101778 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
