Man in a van wrote: > Hi celo, here's my 2 bits > > Install EDO on the SBTouch with Mojo connected by USB. > > https://docs.google.com/spreadsheets/d/1UnnpylzUvFW3oi0ip5ghpuWFfDVcufKCn8k54uhqYKQ/edit#gid=0 > > > Connect Mojo to amp. > > I'm guessing a bit now, but from my experience with an iFi Nano dac, set > the volume on the Mojo to max. > > In LMS on the player page in Settings set the volume to Variable output > as you will be controlling this with your iphone. > > Controlling the volume in this manner can be a bit risky, make sure you > turn down the volume before switching off. > > Its safer to control the volume with a pre-amp and have both outputs on > the Mojo and SBT set to 100%. > > Maybe/maybe not, switch off the charger when playing music. > > Make sure the volume in LMS is really low before playing any music for > the first time. > > If you can adjust the digital amp volume I would suggest you set it to > the max you are likely to use (use the variable control on your 'phone) > and then back it off a bit and leave it at that setting. This will give > you some headroom for when you start everything at full blast :p;):D. > > Keep safe, it's dangerous out there:cool:
Thank you! For more input, I opened a new thread. Hope it is OK:) ------------------------------------------------------------------------ celo's Profile: http://forums.slimdevices.com/member.php?userid=64476 View this thread: http://forums.slimdevices.com/showthread.php?t=105793 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
