drmatt wrote: > As per my comment in the new thread, note that full output level is > nearly 4.8V on the mojo, so this might totally blow your amp out the > water. Do not default to 100% anything.. > > Do you have any way of confirming that EDO is capable of driving the > mojo in asynchronous mode? Plain old synch USB does not have the same > sonic advantages as asynchronous and you may as well just use a > perfectly working optical or coaxial spdif cable.
I had a quick skim of the specs and line level output is given as > Line Level Mode > To set the output level to 3V ( line level ) for connection to a > preamplifier press both volume buttons > together when switching on the unit. Both volume balls will > illuminate light blue. This mode is not > remembered so when you switch off it will reset back to the previous > volume stored for safety reasons. > still above the normal 2v or so. The headphone outputs (which I assumed the OP wants to use) are given as > output of 35mW into 600ohms, rising to 720mW into 8 ohms. I posted a link to someone using the dac with EDO on a SBTouch. I have not heard either the Mojo or the Hugo but have heard the 2Qute thingy and that sounded fine to my old ears. ------------------------------------------------------------------------ Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=105793 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
