drmatt wrote: > So you are basically relying on the mojo to behave as a pre-amp, because > your "amp" has no volume control so is presumably a fixed gain power > amp. Given that the volume control on the mojo has no remote control > capability I would do the following: > > Turn SBT vol all the way down > Set mojo to "line" level output via magic button sequence > Use SBT volume control to control sound level. > > If you find you can't get to even 30% vol on SBT without it being too > loud you may need to lower the mojo volume setting further. But note > that both these devices use digital volume controls. The mojo has a > higher resolution digital volume control than the SBT, but you still may > lose resolution at low volumes on either, depending on the gain of your > power amp.
What I did was connect the Mojo to SBT via USB (EDO) and then connect the 3.5mm cable (headphone output) to Mojo and other RCA ends to my Sure Electronics Digital Amplifier (no volume). I will try yours tonight :) ------------------------------------------------------------------------ celo's Profile: http://forums.slimdevices.com/member.php?userid=64476 View this thread: http://forums.slimdevices.com/showthread.php?t=105793 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
