Oops, not good. If you ripped the battery connector off the PCB, it will be hard to reattach it firmly enough so it does not come loose again. It's another point where stability relies 100% on the solder connection. You will also have to reconnect the thing to the PCB trace to which it was connected previously. Maybe this was the root cause all the time. If a corrosive agent from the battery has leaked onto the PCB, it will easily destroy the connective "vias" (the bright shiny lines connecting everything). It may also weaken their attachment to the board which might explain why the battery pad went off. If you know anybody with soldering skills, they might be the your best shot at rescuing the PCB. Otherwise it might be best to look for another used Touch remote on eBay if opening one of the original wrapped boxes is not an option - which I can understand very well! It could make $50 or more difference when you sell them as "never opened".
PN me if your Boom / Classic / Transporter display has issues! LMS 7.9.0 on Windows Server 2012 1x Squezeebox Classic SB2 7x Squeezebox Classic SB3 (one waiting for repair) 7x Squeezebox Boom (two waiting for repair) 1x Transporter 2x Controller (one waiting for repair) 3x Touch (two waiting for repair) 1x Radio ------------------------------------------------------------------------ JoeMuc2009's Profile: http://forums.slimdevices.com/member.php?userid=23131 View this thread: http://forums.slimdevices.com/showthread.php?t=108262 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
