bpa wrote: > While using remote loging you can use the command " cat > /proc/asound/cards " to see what audio input/outputs are set up. Your BT > should appear. > > Card number may be the issue. For example, it is possible if BT USB is > available at power up it is designated card 0 but if inserted after > login it is designated card 3 (the numbers used are just examples - the > issue is difference/chnage) > > edit: > Example of s simple audio input/out USB device - 1st log shows cards > after plyugin when powered up. 2nd log shows cards after Touch boot from > cold > > Code: -------------------- > > > # cat /proc/asound/cards > 0 [TXRX ]: MXC_SPDIF - MXC SPDIF TX/RX > MXC Freescale with SPDIF > 1 [fab4 ]: fab4 - fab4 > fab4 (ak4420) > 2 [fab4_1 ]: fab4 - fab4 > fab4 (wm8974) > 3 [default ]: USB-Audio - C-Media USB Headphone Set > C-Media USB Headphone Set at usb-fsl-ehci.0-1, full speed > # > # ls > # packet_write_wait: Connection to 192.168.1.71 port 22: Broken pipe > xxxx@minitower:/mnt/hddrive/home/ubuntu14.04/Downloads$ ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 [email protected] > The authenticity of host '192.168.1.71 (192.168.1.71)' can't be established. > RSA key fingerprint is > Are you sure you want to continue connecting (yes/no)? yes > Failed to add the host to the list of known hosts (/home/xxxxx/.ssh/known_hosts). > [email protected]'s password: > > This network device is for authorized use only. Unauthorized or improper use > of this system may result in you hearing very bad music. If you do not consent > to these terms, LOG OFF IMMEDIATELY. > > Ha, only joking. Now you have logged in feel free to change your root password > using the 'passwd' command. You can safely modify any of the files on this > system. A factory reset (press and hold add on power on) will remove all your > modifications and revert to the installed firmware. > > Enjoy! > # cat /proc/asound/cards > 0 [TXRX ]: MXC_SPDIF - MXC SPDIF TX/RX > MXC Freescale with SPDIF > 1 [default ]: USB-Audio - C-Media USB Headphone Set > C-Media USB Headphone Set at usb-fsl-ehci.0-1, full speed > 2 [fab4 ]: fab4 - fab4 > fab4 (ak4420) > 3 [fab4_1 ]: fab4 - fab4 > fab4 (wm8974) > # > > -------------------- > >
Interesting - but I'm only using the usb for power. The bt device gets the audio from the headphone socket. Touch, Logitech Radio, Logitech UE Radio, O2 Joggler + SqpOS UPnPBridge - 2 paired Sonos Play1 speakers; Rocki - Sony SRS-BTM8 speaker; Pioneer WX-SMA1 speaker; - PURE One Flow internet radio: PURE Jongo S3x ; Jongo T2; Libratone Zipp Castbridge - Chromecast 1 + Chromecast Audio AirplayBridge - Loewe Airspeaker SB Player - Fire TV ------------------------------------------------------------------------------------ ------------------------------------------------------------------------ castalla's Profile: http://forums.slimdevices.com/member.php?userid=15624 View this thread: http://forums.slimdevices.com/showthread.php?t=109245 _______________________________________________ Touch mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/touch
