Hi Scott, On Mon, 2009-07-13 at 10:29 -0700, Scott Miller wrote: > Sometimes that's a sign of a serial comm problem - could be a bad cable, > flaky connection, bad USB adapter, or even a soldering problem on one of > the charge pump capacitors near the ST202. > > First thing to try is disabling turbo mode. That'll knock it down to > 4800 baud, which is usually enough to get around marginal cabling. > Already done that. :-) The cables do work on the second OT2m, so there shouldn't be a problem there. Not using a "USB to serial" cable either.
> Scott > > Ron Perry wrote: > > > > > > > > Hi, > > I've think I've stuffed up. I've tried to upload the ot2.s19 and I > > believe have the OT2m in an unusable state. > > On power up the ACT Red led come on then the ACT green led pulses. > > After some time both the TX and RX lights light up. > > otwincfg goes into Firmware Initalization (with a green ACT led), > > Choice of file or web works, and it starts to "Write to Tracker". > > The write to tracker fails, with the error "Unable to verify block at > > "varies". otwincfg reports "Configutation write failed" On closing that > > popup otwincfg exits. > > > > My second OT2m works..but I'm not up loading anything. :-) > > > > Ron > > vk3ecv > > > > > > > > > > ------------------------------------ > > Yahoo! Groups Links > > >
