Hi Scott,
I've had a tech check out the soldering.  Seems ok, so I will take you
up on your offer to check it out.
Regards,
Ron
vk3ecv

  
On Tue, 2009-07-14 at 17:48 -0700, Scott Miller wrote:
> Ok.  I'd suggest checking out the soldering on the capacitors near the 
> ST202, and on the ST202 itself (the fine-pitch chip on the upper right) 
> if you're so inclined.  Otherwise you can send it back and I'll check it 
> out.
> 
> Scott
> 
> Ron Perry wrote:
> > 
> > 
> > 
> > Hi Scott,
> > On Mon, 2009-07-13 at 10:29 -0700, Scott Miller wrote:
> >  > Sometimes that's a sign of a serial comm problem - could be a bad cable,
> >  > flaky connection, bad USB adapter, or even a soldering problem on one of
> >  > the charge pump capacitors near the ST202.
> >  >
> >  > First thing to try is disabling turbo mode. That'll knock it down to
> >  > 4800 baud, which is usually enough to get around marginal cabling.
> >  >
> > Already done that. :-) The cables do work on the second OT2m, so there
> > shouldn't be a problem there. Not using a "USB to serial" cable either.
> > 
> >  > Scott
> >  >
> >  > Ron Perry wrote:
> >  > >
> >  > >
> >  > >
> >  > > Hi,
> >  > > I've think I've stuffed up. I've tried to upload the ot2.s19 and I
> >  > > believe have the OT2m in an unusable state.
> >  > > On power up the ACT Red led come on then the ACT green led pulses.
> >  > > After some time both the TX and RX lights light up.
> >  > > otwincfg goes into Firmware Initalization (with a green ACT led),
> >  > > Choice of file or web works, and it starts to "Write to Tracker".
> >  > > The write to tracker fails, with the error "Unable to verify block at
> >  > > "varies". otwincfg reports "Configutation write failed" On closing that
> >  > > popup otwincfg exits.
> >  > >
> >  > > My second OT2m works..but I'm not up loading anything. :-)
> >  > >
> >  > > Ron
> >  > > vk3ecv
> >  > >
> >  > >
> >  > >
> >  >
> >  >
> >  >
> >  > ------------------------------------
> >  >
> >  > Yahoo! Groups Links
> >  >
> >  >
> >  >
> > 
> > 
> 
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> 
> 

Reply via email to