Ok, don't forget to include your order number and the problem description.

Scott

Ron Perry wrote:
>  
> 
> Hi Scott,
> I've had a tech check out the soldering. Seems ok, so I will take you
> up on your offer to check it out.
> Regards,
> Ron
> vk3ecv
> 
> On Tue, 2009-07-14 at 17:48 -0700, Scott Miller wrote:
>  > Ok. I'd suggest checking out the soldering on the capacitors near the
>  > ST202, and on the ST202 itself (the fine-pitch chip on the upper right)
>  > if you're so inclined. Otherwise you can send it back and I'll check it
>  > out.
>  >
>  > Scott
>  >
>  > Ron Perry wrote:
>  > >
>  > >
>  > >
>  > > Hi Scott,
>  > > On Mon, 2009-07-13 at 10:29 -0700, Scott Miller wrote:
>  > > > Sometimes that's a sign of a serial comm problem - could be a bad 
> cable,
>  > > > flaky connection, bad USB adapter, or even a soldering problem on 
> one of
>  > > > the charge pump capacitors near the ST202.
>  > > >
>  > > > First thing to try is disabling turbo mode. That'll knock it down to
>  > > > 4800 baud, which is usually enough to get around marginal cabling.
>  > > >
>  > > Already done that. :-) The cables do work on the second OT2m, so there
>  > > shouldn't be a problem there. Not using a "USB to serial" cable either.
>  > >
>  > > > Scott
>  > > >
>  > > > Ron Perry wrote:
>  > > > >
>  > > > >
>  > > > >
>  > > > > Hi,
>  > > > > I've think I've stuffed up. I've tried to upload the ot2.s19 and I
>  > > > > believe have the OT2m in an unusable state.
>  > > > > On power up the ACT Red led come on then the ACT green led pulses.
>  > > > > After some time both the TX and RX lights light up.
>  > > > > otwincfg goes into Firmware Initalization (with a green ACT led),
>  > > > > Choice of file or web works, and it starts to "Write to Tracker".
>  > > > > The write to tracker fails, with the error "Unable to verify 
> block at
>  > > > > "varies". otwincfg reports "Configutation write failed" On 
> closing that
>  > > > > popup otwincfg exits.
>  > > > >
>  > > > > My second OT2m works..but I'm not up loading anything. :-)
>  > > > >
>  > > > > Ron
>  > > > > vk3ecv
>  > > > >
>  > > > >
>  > > > >
>  > > >
>  > > >
>  > > >
>  > > > ------------------------------------
>  > > >
>  > > > Yahoo! Groups Links
>  > > >
>  > > >
>  > > >
>  > >
>  > >
>  >
>  >
>  >
>  > ------------------------------------
>  >
>  > Yahoo! Groups Links
>  >
>  >
>  >
> 
> 

Reply via email to