--- In [email protected], "Ronald Real" <wr...@...> wrote: > > --- In [email protected], "Ronald Real" <wr5rr@> wrote: > > > > When testing the board in diagnostics, with otwincfg, the red and green and > > leds are reversed. When the Alinco receives a signal no led illuminates. I > > can hear a little poping sound when a signal is received, but no led. I was > > able to get the T2-135 to reply with version 54680 once. It will not reply > > to any commands from the nuvi 350 at all, just the one time version. At a > > stand still with the T2-135. > > Ron WR5RR > > > A little more info: The red and green leds light rapidly, then go off and > after a while both go off and neither light while receiving a signal. >
Would someone send me a sample cfg file for the Alinco T2-135 tracker? No luck with this tracker yet. I am using the nuvi cable from Argent prewired with the connecter for the T2-135. And as a side note I purchased the 18 pin cable wired for the T2-135 to see if my Street Pilot C530 would work, but I get no FMI nchange to the Street Pilot. My thinking was if the messaging worked with the Street Pilot I would turn the waypoints off. Ron WR5RR
