If you can unload it, do so, I have had nothing but grief with mine.
--- In [email protected], "Ronald Real" <wr...@...> wrote:
>
> --- In [email protected], "Ronald Real" <wr5rr@> wrote:
> >
> > --- In [email protected], "Ronald Real" <wr5rr@> wrote:
> > >
> > > When testing the board in diagnostics, with otwincfg, the red and green
> > > and leds are reversed. When the Alinco receives a signal no led
> > > illuminates. I can hear a little poping sound when a signal is received,
> > > but no led. I was able to get the T2-135 to reply with version 54680
> > > once. It will not reply to any commands from the nuvi 350 at all, just
> > > the one time version. At a stand still with the T2-135.
> > > Ron WR5RR
> > >
> > A little more info: The red and green leds light rapidly, then go off and
> > after a while both go off and neither light while receiving a signal.
> >
>
> Would someone send me a sample cfg file for the Alinco T2-135 tracker? No
> luck with this tracker yet. I am using the nuvi cable from Argent prewired
> with the connecter for the T2-135. And as a side note I purchased the 18 pin
> cable wired for the T2-135 to see if my Street Pilot C530 would work, but I
> get no FMI nchange to the Street Pilot. My thinking was if the messaging
> worked with the Street Pilot I would turn the waypoints off.
> Ron WR5RR
>
