--- In [email protected], "Ronald Real" <wr...@...> wrote: > > --- In [email protected], "Ronald Real" <wr5rr@> wrote: > > > > --- In [email protected], "Ronald Real" <wr5rr@> wrote: > > > > > > When testing the board in diagnostics, with otwincfg, the red and green > > > and leds are reversed. When the Alinco receives a signal no led > > > illuminates. I can hear a little poping sound when a signal is received, > > > but no led. I was able to get the T2-135 to reply with version 54680 > > > once. It will not reply to any commands from the nuvi 350 at all, just > > > the one time version. At a stand still with the T2-135. > > > Ron WR5RR > > > > > A little more info: The red and green leds light rapidly, then go off and > > after a while both go off and neither light while receiving a signal. > > > > Would someone send me a sample cfg file for the Alinco T2-135 tracker? No > luck with this tracker yet. I am using the nuvi cable from Argent prewired > with the connecter for the T2-135. And as a side note I purchased the 18 pin > cable wired for the T2-135 to see if my Street Pilot C530 would work, but I > get no FMI nchange to the Street Pilot. My thinking was if the messaging > worked with the Street Pilot I would turn the waypoints off. > Ron WR5RR >
Update on the 18 pin cable for the Street Pilot. It works, but like some other GPS units, it does add multiple waypoints. Bases on what others thought I expected that, but I can turn waypoints off, and use it for messaging. Ron WR5RR
