Did you find a solution other than the OT2m?
--- In [email protected], "k0yg" <k...@...> wrote:
>
> I had the exact same problem over 1.5 years ago when I purchsed the T2
> (prototype) to use as a weather station with the Ultimeter 2000. Another
> person on the forum has the same problem if you search the archives. There
> is a software issue with the T2 that Scott has not been able to fix. I sent
> him some files containing the data that the T2 generates but he was unable to
> reproduce the problem and fix it. For my application, the T2 is unusable for
> this very reason.
>
> Mark
>
> --- In [email protected], "Mike Zwingl oe3mzc" <oe3mzc@> wrote:
> >
> > dr group,
> > I have an ultimeter 2000 weather station without an humidity sensor
> > connected to the serial port 1of an OT2m.
> > Wx data is beeing transmitted, but wrong data for humidity is transmitted.
> > The display of the weather station does NOT show any humidity, since no
> > sensor is connected.
> > But the OT2m transmitts random humidity values, mostly 33% or 100%...
> > All other values are ok and coresponding to the display of Peet Bros
> > Ultimeter2000,
> > only humity is wrong.
> > I use latest development build firmware. (see
> > http://aprs.fi/weather/OE3MZC-2)
> >
> > Interestingly when I do the same with my OT1plus, humidity is transmitted
> > correctly. ( h000)
> >
> > Some glitch in the firmware when ot2m retrieving data from ultimeter in
> > complete record mode?
> >
> > tnx for your help or comments.
> > 73 de Mike
> > OE3MZC
> >
>
