Not with the Ultimeter 2000. I ended up going a completely different route with the TAPR T238. It isn't nearly as capable but does the job.
If Scott fixes this, I'm still interested in building another stand-alone WX station based on the T2 since I have most of the parts. Mark --- In [email protected], "Rudy" <ben...@...> wrote: > > Did you find a solution other than the OT2m? > > --- In [email protected], "k0yg" <kc0d@> wrote: > > > > I had the exact same problem over 1.5 years ago when I purchsed the T2 > > (prototype) to use as a weather station with the Ultimeter 2000. Another > > person on the forum has the same problem if you search the archives. There > > is a software issue with the T2 that Scott has not been able to fix. I sent > > him some files containing the data that the T2 generates but he was unable > > to reproduce the problem and fix it. For my application, the T2 is unusable > > for this very reason. > > > > Mark > > > > --- In [email protected], "Mike Zwingl oe3mzc" <oe3mzc@> wrote: > > > > > > dr group, > > > I have an ultimeter 2000 weather station without an humidity sensor > > > connected to the serial port 1of an OT2m. > > > Wx data is beeing transmitted, but wrong data for humidity is transmitted. > > > The display of the weather station does NOT show any humidity, since no > > > sensor is connected. > > > But the OT2m transmitts random humidity values, mostly 33% or 100%... > > > All other values are ok and coresponding to the display of Peet Bros > > > Ultimeter2000, > > > only humity is wrong. > > > I use latest development build firmware. (see > > > http://aprs.fi/weather/OE3MZC-2) > > > > > > Interestingly when I do the same with my OT1plus, humidity is transmitted > > > correctly. ( h000) > > > > > > Some glitch in the firmware when ot2m retrieving data from ultimeter in > > > complete record mode? > > > > > > tnx for your help or comments. > > > 73 de Mike > > > OE3MZC > > > > > >
