I assume Scott only fixed it with the OT1plus, since its working perfect there, but no digipeat function available with the OT1+. 73 de Mike oe3mzc
----- Original Message ----- From: k0yg To: [email protected] Sent: Thursday, October 08, 2009 5:21 PM Subject: [tracker2] Re: wrong Humidity on OT2 WX with Peet Bros Ultimeter2000 ? Not with the Ultimeter 2000. I ended up going a completely different route with the TAPR T238. It isn't nearly as capable but does the job. If Scott fixes this, I'm still interested in building another stand-alone WX station based on the T2 since I have most of the parts. Mark --- In [email protected], "Rudy" <ben...@...> wrote: > > Did you find a solution other than the OT2m? > > --- In [email protected], "k0yg" <kc0d@> wrote: > > > > I had the exact same problem over 1.5 years ago when I purchsed the T2 (prototype) to use as a weather station with the Ultimeter 2000. Another person on the forum has the same problem if you search the archives. There is a software issue with the T2 that Scott has not been able to fix. I sent him some files containing the data that the T2 generates but he was unable to reproduce the problem and fix it. For my application, the T2 is unusable for this very reason. > > > > Mark > > > > --- In [email protected], "Mike Zwingl oe3mzc" <oe3mzc@> wrote: > > > > > > dr group, > > > I have an ultimeter 2000 weather station without an humidity sensor connected to the serial port 1of an OT2m. > > > Wx data is beeing transmitted, but wrong data for humidity is transmitted. > > > The display of the weather station does NOT show any humidity, since no sensor is connected. > > > But the OT2m transmitts random humidity values, mostly 33% or 100%... > > > All other values are ok and coresponding to the display of Peet Bros Ultimeter2000, > > > only humity is wrong. > > > I use latest development build firmware. (see http://aprs.fi/weather/OE3MZC-2) > > > > > > Interestingly when I do the same with my OT1plus, humidity is transmitted correctly. ( h000) > > > > > > Some glitch in the firmware when ot2m retrieving data from ultimeter in complete record mode? > > > > > > tnx for your help or comments. > > > 73 de Mike > > > OE3MZC > > > > > >
