the build is 55076 and it would be helpful to have a seperate intervall for WX-transmissions. However, if the humidity gets fixed the OT2m is a very nice multifunctional device to combine a local digipeater, a weather station and to supervise the local voice repeater site by means of telemetry packets. tnx vy 73 de Mike oe3mzc
----- Original Message ----- From: Scott Miller To: [email protected] Sent: Thursday, October 08, 2009 3:49 AM Subject: Re: [tracker2] wrong Humidity on OT2 WX with Peet Bros Ultimeter2000 ? I thought I'd fixed that. I'll have to check. What is the firmware build number? Scott Mike Zwingl oe3mzc wrote: > > > dr group, > I have an ultimeter 2000 weather station without an humidity sensor > connected to the serial port 1of an OT2m. > Wx data is beeing transmitted, but wrong data for humidity is transmitted. > The display of the weather station does NOT show any humidity, since no > sensor is connected. > But the OT2m transmitts random humidity values, mostly 33% or 100%... > All other values are ok and coresponding to the display of Peet Bros > Ultimeter2000, > only humity is wrong. > I use latest development build firmware. (see > http://aprs.fi/weather/OE3MZC-2 <http://aprs.fi/weather/OE3MZC-2>) > > Interestingly when I do the same with my OT1plus, humidity is > transmitted correctly. ( h000) > > Some glitch in the firmware when ot2m retrieving data from ultimeter in > complete record mode? > > tnx for your help or comments. > 73 de Mike > OE3MZC >
