Thanks! I have the cable as well, so I'll go that route. I had forgotten I picked up both a rear and microphone connector TNC cable for the Alinco. Now, to see if I can FIND said cables....
Lynn (D) - KJ4ERJ Yono wrote: > No it won't passthru, but the signals can still be tapped thru the front > panel mic connector. > > de Paulus N5SNN / YD0NXX > > Sent from my iPhone 3GS > > On Apr 6, 2010, at 7:08 PM, "Lynn W. Deffenbaugh (Mr)" <[email protected]> > wrote: > > The Alinco DR-135 brings the TNC-type connections (audio/PTT) out > through a DE9 on the back of the unit when there's no internal TNC. > When I install a T2-135 and turn the radio to data mode, the same DE9 > connector becomes one of the ports configurable for GPS or KISS or TEXT > or whatever (mine normally connects to a Nuvi 350 for FMI). > > With a T2-135 installed and the radio NOT in data mode, does the DE9 > revert back to the original signals? In other words, can I connect an > external TNC with a compatible cable for the original DE9 pinout or do I > need to remove the T2-135 and put the DE9's internal cable back into the > radio's circuit board disconnecting the T2-135? > > In sort, with the radio not in data mode, does the T2-135 pass the > original signals through to the outside port? > > Lynn (D) - KJ4ERJ - Needing to experiment but loath to remove a > perfectly functioning T2-135! > >
