In-Reply-To: <[email protected]>
NET 4 (ETS 300 001), does not contain all of the current 
requirements for analogue TE for every country in Europe.  Many 
countries now are changing their technical requirements with a view 
to moving to "essential requirements" only.  For example, UK, 
German and Swedish standards currently are quite different to these 
country's contributions to NET 4.  Other countries do use standards 
which refer to ETS 300 001 but in so doing make some changes and 
deletions to the core standard.

The other issue is what you are actually trying to design.  ETS 300 
001, where it does apply, applies to terminal equipment.  You 
mentioned using SLIC which leads me to assume that you are actually 
looking to produce a Subscriber Line Interface, ie something which 
terminal equipment would connect to.  If this is the case, ETS 300 
001 would not apply at all other than by a few references from 
country's national standard for SLIs (ie Call Routing Standards, 
etc).

Depending on what you are trying to design and where ultimately you 
would want to sell largely defines which solution you will use.  
You need to be wary of using off the shelf, monolithic interfaces 
of any description if your future marketing plans may take you into 
new countries which may have not been considered by the designers 
of the interface chipset.

If it is an interface for terminal equipment, my preference would 
still be to use a low cost solution based on discrete components.  
We have been using a solution here for some time for example which 
uses a common PCB but can be populated with different component 
values to meet the requirements of just about any country 
world-wide.  This gives huge advantages in manufacture, including 
the possibility of second sourcing components which may not be an 
option if you use a monolithic solution.

If you need more information please call.

Best Regards


Nick



--------------------------------------------------------------------
   Nick Evans                    Tel:    +44 (0)1600 772220
   GENESYS TELECOM               Fax:    +44 (0)1600 716744
   Singleton Court               Mobile: +44 (0)385 367348
   Wonastow Road                 EMAIL:  [email protected]
   Monmouth
   Gwent
   NP5 3AH
   UK
--------------------------------------------------------------------
   World-wide Market Access and Regulatory Compliance Consultants
--------------------------------------------------------------------

Reply via email to