Cynthia,
Your correct. You need an Austel approved report and statement of
compliance for the product. The Austel report is a reformatted CB
Scheme report based on IEC950. This is also true of your Emissions and
Telco reports.
Also, it must reside in-country and the permit is issued to a local
presence.
Dana Craig
Digital Link
______________________________ Reply Separator _________________________________
Subject: Re: Australian IEC 950 document.
Author: [email protected] at SMTPLINK-DL
List-Post: [email protected]
Date: 8/21/96 11:40 AM
TS001 is the Australia standards entitled
"Safety Requirements for Customer Equipment"
AS3260 is the Australian standards entitled
"Safety of Information Technology Equipment
Including Electrical Business Equipment"
The New Zealand safety standard is NZS 661/PTC 101
My experience is that Australia will require that your safety
report be AS3260 and that they will not accept a EN60950. New Zealand
on the other hand has accepted EN60950 reports.
Cynthia Pleach
Manager, Homologation
Digi International
treg @ world.std.com
08/21/96 12:51 PM
To: 'TREG' <treg @ world.std.com> @ SMTP
cc:
Subject: Australian IEC 950 document.
Dear TREGers:
I want to know if I'm correct with this information.
-The Australian IEC 950 based standard is AS3260.
-The New Zealand IEC 950 based standard is TS001.
Am I correct? Thanx for your help in advance.
Mel Pedersen Midcom, Inc.
Homologations Engineer phone: (605) 882-8535
e-mail: [email protected] fax: (605) 886-6752
