Scott,

I have wanted to write a book that eliminates wading through all the math
to explain impairments and problems they cause.  But, I'm sorry to say I've
never had the time to do so.  If you don't mind wading through math,
sometimes in minutia, below are several publications that cover the
subject.  Unfortunately most cover impairments from the stand point of
designing data transmission equipment and/or modems.

They do not go into the details of impairments in any depth.  Only how to
solve the problems caused by the impairments.  You may have some difficulty
obtaining the older publications, but many Engineering Libraries at
Universities will have them in their archives.

As you can see some of the publications are rather dated, but still very
relevant, so don't let the dates scare you off.  They are still referenced
in all present day publications dealing with the subject.

The books by Bennet & Davey and Lucky, Salz & Weldon are especially good.
I have used them for 25 years.  The BSTJ publications are very good.  They
are based on actual data taken by AT&T engineers before divesture and
things haven't changed that much since then.  Although some pseudo
technologists claim it has.  In my opinion the same problems still exist.

I will concede one difference.   There is very little mechanical switching
today.  As a consequence the noise generated by mechanical switching of
properly and poorly adjusted switches no longer exists.  (I added that
statement to insure Vic B. would not call me on it.)  They only thing not
covered extensively is fiber, which in my opinion is only used between CO's
and has not change impairments that much.  Fiber is not available to many
end users, commercial or otherwise.

Regards,

Duane


Capabilities of the Telephone Network for Data Transmission
A. A. Alexander, R M. Gryb & D. W. Nast
Bell System Technical Journal (BSTJ), vol. 39,  pp. 431 - 476,  May 1960

Data Transmission
W. R. Bennet & J. R. Davey
McGraw-Hill, 1965
ISBN 07 - 00467 - 8

Principles of Data Transmission
R. W. Lucky, J. Salz & E. J. Weldon
McGraw-Hill, 1966

Physical and Transmission Characteristics of Customer Loop Plant
P. A.  Gresh
BSTJ, vol. 48, pp. 3337 - 3385, Dec. 1969

Principles of Digital Communications and Coding
A. J. Viterbi & J. K. Omura
McGraw-Hill,  1979

Digital Communications
J. G. Proakis
McGraw-Hill, 1983

1982/1983 End Office Connection Study: Analog Voice and Voiceband Data
Transmission Characteristics of the Public Switched network
M. B. Carey, H. -T. Chen, A. Descloux, J. F. Ingle, & K. I. Park
AT&T BSTJ, vol. 63, pp. 2059 - 2119, Nov. 1984

Advanced Digital Communications
Systems and Signal Processing Techniques
Dr. Kamilo Feher
Prentice - Hall, 1987
ISBN 0 - 13 - 011198 - 8

The Theory and Practice of Modem Design
John A.C. Bingham
John Wiley & Sons, 1988
ISBN 0 - 471 - 85108 - 6




>Hello TREG'ers,
>
>I'm looking for a recommendation to a good engineering book that
>discusses telephone line impairments in depth.
>
>I've gotten copies of most of the TIA and ITU standards that apply.
>While very helpful, they only go just so far.  They are consensus
>documents written my committees, and what I'd like to learn about
>are the fundamentals behind the standards from someone who has
>"walked the walk."
>
>Not sure if a book like this exists, but thought I'd ask.  (If anyone
>out there is writing such a book, I'd be interested in trading an
>independent review for a draft copy.)
>
>Thanks!
>
>  -- Scott R.
>
>-----------------------------------------------------------------------
> Scott Roleson, PE              |   Internet: [email protected]
> EMC & Telecom Engineer         |     http://www.WP.com/SRoleson
> San Diego Division  MS 8-60    |   Telephone: +1-619-655-4809
> Hewlett-Packard Company        |   FAX:       +1-619-655-5931
> 16399 W. Bernardo Drive        |   Amateur Radio:  KC7CJ
> San Diego, CA  92127-1899  USA |   Any opinions are my own, not HP's.
>-----------------------------------------------------------------------


Reply via email to