Addition: I have a lot of "Unknown device"'s in my lspci. They are also on the two network controllers:
01:00.0 Ethernet controller: Broadcom Corporation: Uknown device 1659 (rev 11) 04:01.0 Ethernet controller: Intel Corp.: Unknown device 1026 (rev 04) The other devices include: USB Controller, PCI bridge, IDE interface, ISA bridge, Host bridge, PIC. I don't think this is normal. Otherwise, everything else is fine. I also want to split the Broadcom into two IP's. I don't think this should be a problem though. Jason Jason C. Greb wrote: > I have just set up an IBM xSeries 226 server. I had to load the ips > driver, which went find. After the install, I noticed it never found > either one of the NIC cards. It didn't find the built-in Broadcom or the > add in PCIx Intel Gbit adapter I stuck in. I loaded the drivers manually > (tg3, e1000), which seems to load fine, but then a device for them is > never created. Is there something I am missing? I am going to check out > Broadcom's offical driver, but in the mean time, I'd like to get it up > and running with the default drivers. > > Thank you, > Jason C. Greb > ElectroNerdz, Inc. > _______________________________________________ > tsl-discuss mailing list > [email protected] > http://lists.trustix.org/mailman/listinfo/tsl-discuss _______________________________________________ tsl-discuss mailing list [email protected] http://lists.trustix.org/mailman/listinfo/tsl-discuss
