Igor, I wasn't asking you a question, I was just thanking you for your information. I just set it up manually for the moment, via ifcfg-eth0, and it is working.
Jason On Tue, 2005-11-08 at 14:22 +0100, Igor Bujna wrote: > Jason Greb wrote: > > >Igor, > > > >Thank you. I check my file, and mine was the same. So I took it upon me > >to check out a few more things. Such as NONE of my Linux computers have > >an eth0 under dev. I always just assumed it was there. So I went and > >manually configured ifcfg-eth0, and now I am pinging. I will probably do > >a reinstall and load tg3 from the get go, so Trustix can do all the > >configuring for me in case I forgot something. > > > >Also, thank you for letting me know about the ServeRAID 7. The original > >one I was looking at had that, and now I am glad I did not choose that. > > > > > I don't understand yours question and than is my > /etc/sysconfig/network-script/ifcfg-eth0: > DEVICE=eth0 > NAME=$DEVICE > IPADDR=192.168.20.1 > NETMASK=255.255.255.0 > NETWORK=192.168.20.0 > BROADCAST=192.168.20.255 > BOOTPROTO=none > ONBOOT=yes > #GATEWAY= > #MTU="" > # You must install ethtool package to use this options > #ETHTOOL_OPTS="speed 100 duplex full autoneg off" > _______________________________________________ tsl-discuss mailing list [email protected] http://lists.trustix.org/mailman/listinfo/tsl-discuss
