Jason C. Greb wrote:
>>I have just set up an IBM xSeries 226 server. I had to load the ips >>driver, which went find. After the install, I noticed it never found >>either one of the NIC cards. It didn't find the built-in Broadcom or the >>add in PCIx Intel Gbit adapter I stuck in. I loaded the drivers manually >>(tg3, e1000), which seems to load fine, but then a device for them is >>never created. Is there something I am missing? I am going to check out >>Broadcom's offical driver, but in the mean time, I'd like to get it up >>and running with the default drivers. >> >> > > Hi, I have instaled Trustix 2.2. on xSeries 226. And everything is OK. This is my modules.conf: ------------------------------------------------------------------------------------------- alias eth0 tg3 alias scsi_hostadapter ips alias scsi_hostadapter1 ata_piix alias usb-controller usb-uhci alias usb-controller1 ehci-hcd ------------------------------------------------------------------------------------------- One problem is on hardware"like emulation" RAID-1 on ServeRaid7.There is proprietary driver and this driver not function on Trustix. When i buy this server i get card ServerRAID6i+ http://www-132.ibm.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=-840&storeId=1&langId=-1&dualCurrId=73&categoryId=4611686018425045952&productId=8706232 .This card work fine with ips.o module(I run 2SCSI HDD in RAID-1).But thirst i have problem with installed other IDE or SATA disk, i must apply patch from IBM to BIOS and ServerRAID card and after is everything OK. _______________________________________________ tsl-discuss mailing list [email protected] http://lists.trustix.org/mailman/listinfo/tsl-discuss
