I'm sending a JPEG file with the info you need (4DTV.jpg). If Yahoo doesn't let it go through, send me your email address, ad I'll send it directly to you. Norm -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of llodge1987 Sent: Tuesday, July 12, 2005 12:39 PM To: [email protected] Subject: [TVRO] More advice needed on actuator arm Hello, Wise Ones!
I am in need of more advice. I replaced my HTS70 with a 4D because my actuator arm was not receiving enough voltage to move it. As I was installing the 4D, the dish moved to its limit and now appears to be stuck. The limits on the 4D are very close for some reason. East is at 4000 and West is at 4080. When I try to move it West, it says the dish limit has been reached. It was suggested that I try to "fool" the 4D by reversing the actuator wires on the back of the unit. That has not worked either because the message then comes up that the limit cannot be greater than the other limit. The arm appears to be fully extended and when trying to move it with the 4D it is not moving. Is there a way to get the dish to move using the receiver or am I better off simply unscrewing the dish and moving it manually? I've called for a tech to come out that works on BUDs, but he hasn't been able to get here in the past three weeks. Any advice for the technically challenged? Thanks! [Non-text portions of this message have been removed] Community email addresses: Post message: mailto:[email protected] Subscribe: mailto: [EMAIL PROTECTED] Unsubscribe: mailto:[EMAIL PROTECTED] List owner: mailto:[EMAIL PROTECTED] Shortcut URL to this page: http://www.groups.yahoo.com/group/TVRO Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/TVRO/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
