> Then buy a smarter router ;-) The PORT command sends the private > IP of the client which has to be patched to the plublic IP by the > the router. Modern routers (even some cheep ones) can do that.
The Lighting-Console (Client) and my FTP Server are in a LAN only connected by a switch, no firewall installed. (even same IP-range 192.168.200.x ) best regards Patrick Schmidt ----- Original Message ----- From: "Arno Garrels" <[EMAIL PROTECTED]> To: "ICS support mailing" <twsocket@elists.org> Sent: Wednesday, April 18, 2007 5:01 PM Subject: Re: [twsocket] 501 Cannot RETR. Error - Socket withicsFtpServ(V6forDelphi7) > Patrick Schmidt - STEP Software GmbH wrote: >> Passive mode is not possible, my client is a (Hardware-)Lighting- >> console. The only options to >> configure in console are: IP, user, pw and a directory > > Then buy a smarter router ;-) The PORT command sends the private > IP of the client which has to be patched to the plublic IP by the > the router. Modern routers (even some cheep ones) can do that. > > -- > Arno Garrels [TeamICS] > http://www.overbyte.be/eng/overbyte/teamics.html > >> >> best regards >> Patrick Schmidt >> >> ----- Original Message ----- >> From: "Fastream Technologies" <[EMAIL PROTECTED]> >> To: "ICS support mailing" <twsocket@elists.org> >> Sent: Wednesday, April 18, 2007 4:12 PM >> Subject: Re: [twsocket] 501 Cannot RETR. Error - Socket with >> icsFtpServ (V6forDelphi7) >> >> >>> Try the passive mode. >>> >>> Regards, >>> >>> SZ >>> >>> ----- Original Message ----- >>> From: "Patrick Schmidt - STEP Software GmbH" <[EMAIL PROTECTED]> >>> To: <twsocket@elists.org> >>> Sent: Wednesday, April 18, 2007 5:08 PM >>> Subject: [twsocket] 501 Cannot RETR. Error - Socket with icsFtpServ >>> (V6 forDelphi7) >>> >>> >>>> STEP >>>> My FTP-Client send a "LIST" which is not handled correctly. After >>>> the "LIST" >>>> it >>>> takes about 2 minutes until the error is displayed and after that >>>> the client >>>> gets >>>> the direcory listing. >>>> >>>> See log-file: >>>> 192.168.200.167 connected >>>> Client-Command: USER MA >>>> Answer to client: 331 Password required for MA. >>>> Client-Command: PASS ma >>>> Login Username:MA Password:ma >>>> Answer to client: 230 User MA logged in. >>>> Client-Command: TYPE I >>>> Answer to client: 200 Type set to I. >>>> Client-Command: MKD slp >>>> Make Directory: F:\PROJ\grandMA ftp\slp >>>> Answer to client: 550 'F:\PROJ\grandMA ftp\slp': can't create >>>> directory. Client-Command: CWD slp >>>> Change Directory: F:\PROJ\grandMA ftp\slp\ >>>> Answer to client: 250 CWD command successful. "F:/PROJ/grandMA >>>> ftp/slp/" is >>>> current directory. >>>> Client-Command: PORT 192,168,200,167,4,205 >>>> Answer to client: 200 Port command successful. >>>> Client-Command: LIST >>>> ! Answer to client: 150 Opening data connection for directory list. >>>> !!! Here the communication hang for nearly 2 minutes !!! >>>> ! Answer to client: 501 Cannot RETR. Error - Socket is not connected >>>> (#10057) >>>> >>>> best regards >>>> Patrick Schmidt >>>> >>>> -- >>>> To unsubscribe or change your settings for TWSocket mailing list >>>> please goto http://www.elists.org/mailman/listinfo/twsocket >>>> Visit our website at http://www.overbyte.be >>> >>> -- >>> To unsubscribe or change your settings for TWSocket mailing list >>> please goto http://www.elists.org/mailman/listinfo/twsocket >>> Visit our website at http://www.overbyte.be > -- > To unsubscribe or change your settings for TWSocket mailing list > please goto http://www.elists.org/mailman/listinfo/twsocket > Visit our website at http://www.overbyte.be -- To unsubscribe or change your settings for TWSocket mailing list please goto http://www.elists.org/mailman/listinfo/twsocket Visit our website at http://www.overbyte.be
