The cmd_reset member of the flash info struct is not initialized until the
specific cmdset function is called. This normally happens by:
flash_get_size -> flash_detect_cfi -> cmdset_*_init
That means we cannot use cmd_reset inside of the cfi detection functions.
Signed-off-by: Sonic Zhang <[EMAIL PROTECTED]>
Signed-off-by: Mike Frysinger <[EMAIL PROTECTED]>
---
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index eb509f5..eb3f517 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -1538,7 +1538,7 @@
{
int cfi_offset;
- flash_write_cmd (info, 0, 0, info->cmd_reset);
+ flash_write_cmd (info, 0, 0, FLASH_CMD_RESET);
for (cfi_offset=0;
cfi_offset < sizeof(flash_offset_cfi) / sizeof(uint);
cfi_offset++) {
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
