On Tuesday 29 January 2008, Mike Frysinger wrote: > The cmd_reset member of the flash info struct is not initialized until the > specific cmdset function is called. This normally happens by: > flash_get_size -> flash_detect_cfi -> cmdset_*_init > That means we cannot use cmd_reset inside of the cfi detection functions.
Right. But your version now uses the Intel reset command (0xff) unconditionally. AMD/Spansion style flash chips need AMD_CMD_RESET (0xf0) instead. Any idea how we should handle this? Thanks. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
