On 25/04/2013 15:36, Marek Vasut wrote: > Dear Stefano Babic, > Hi Marek,
>> At least add documentation in the README. It is only your choice if you >> will add two different targets to boards.cfg > > I'd prefer not to do that. We're currently booting from NAND and SD, so we > use > u-boot.imx resp. u-boot-with-nand-spl.imx there. But using the BOOT_FROM > "nand" > in the imximage.cfg is indeed wrong. We should focus on fixing that. > > We can now pre-process the imximage.cfg with CPP, so why don't we just > replace > BOOT_FROM "foobar" with BOOT_OFFSET CONFIG_IMX_BOOT_OFFSET +1 > as mentioned by > someone in the thread already and setup the offset either in board config > file > or boards.cfg and even have some default value? Agree Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] ===================================================================== _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
