On Sunday, June 14, 2015 at 12:40:11 PM, Hans de Goede wrote: > Hi Ian, Paul, > > Here is a patch to fix the problems where most usb devices will no longer > work after a "usb reset ", when connected to the otg controller in host > mode + a related cleanup patch. > > Ian I would like to send out a PR with these 2 as fixed for v2015.07, can > you review them please? Note I've not tested this with the otg in gadget > mode, but we do not have gadget mode enabled by default anywhere atm, so > I still consider this suitable as a bugfix for v2015.07. > > Paul, can you test these with gadget mode? Specifically if they help the > problem you were seeing when switching roles? > > Also this bit from the kernel code for the sunxi glue may be relevant > to your problems: > > if ((musb->int_usb & MUSB_INTR_RESET) && !is_host_active(musb)) { > /* ep0 FADDR must be 0 when (re)entering peripheral mode */ > musb_ep_select(musb->mregs, 0); > musb_writeb(musb->mregs, MUSB_FADDR, 0); > } > > This is from the interrupt handler in the sunxi-musb glue in the kernel, > maybe we can do the same, and/or maybe we need to do: > > /* ep0 FADDR must be 0 when (re)entering peripheral mode */ > musb_ep_select(musb->mregs, 0); > musb_writeb(musb->mregs, MUSB_FADDR, 0); > > From sunxi_musb_disable? > > From my experience sofar we should avoid doing a full reset from musb_stop > / sunxi_musb_disable as musb_init_controller never gets re-run, so doing a > full reset leaves things in a bad state where only ep0 still seems to > work, this may be what you were seeing before.
Hi, do you want me to pick this via u-boot-usb/master ? Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot