Hi,
On 19-06-15 14:35, Marek Vasut wrote:
On Sunday, June 14, 2015 at 12:40:11 PM, Hans de Goede wrote:
Hi Ian, Paul,
Here is a patch to fix the problems where most usb devices will no longer
work after a "usb reset ", when connected to the otg controller in host
mode + a related cleanup patch.
Ian I would like to send out a PR with these 2 as fixed for v2015.07, can
you review them please? Note I've not tested this with the otg in gadget
mode, but we do not have gadget mode enabled by default anywhere atm, so
I still consider this suitable as a bugfix for v2015.07.
Paul, can you test these with gadget mode? Specifically if they help the
problem you were seeing when switching roles?
Also this bit from the kernel code for the sunxi glue may be relevant
to your problems:
if ((musb->int_usb & MUSB_INTR_RESET) && !is_host_active(musb)) {
/* ep0 FADDR must be 0 when (re)entering peripheral mode */
musb_ep_select(musb->mregs, 0);
musb_writeb(musb->mregs, MUSB_FADDR, 0);
}
This is from the interrupt handler in the sunxi-musb glue in the kernel,
maybe we can do the same, and/or maybe we need to do:
/* ep0 FADDR must be 0 when (re)entering peripheral mode */
musb_ep_select(musb->mregs, 0);
musb_writeb(musb->mregs, MUSB_FADDR, 0);
From sunxi_musb_disable?
From my experience sofar we should avoid doing a full reset from musb_stop
/ sunxi_musb_disable as musb_init_controller never gets re-run, so doing a
full reset leaves things in a bad state where only ep0 still seems to
work, this may be what you were seeing before.
Hi,
do you want me to pick this via u-boot-usb/master ?
No, I've already send a pull-req for them via u-boot-sunxi/master and they
are already merged :)
Regards,
Hans
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
