+ ML On Wed, Mar 1, 2017 at 6:23 PM, Jagan Teki <[email protected]> wrote: > Hi Peng and All, > > I'm trying to boot from SD, on imx6qplus sabre board. > > - SW6: D1-D8 => 0100 0010 > - SD card on SD3 > - D12 with USB-to-Serial 115200 8N1 > - Power supply Output 5V > > Build: > $ make mx6qpsabreauto_defconfig; make > $ dd if=u-boot.imx of=/dev/sda bs=512 seek=2 > > When I plug-in power, power supply slot D1, D2 are green and D3 glow > red not able to get the log on uart. > > Any help?
thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/listinfo/u-boot
