Hi Jagan, On Wed, Mar 1, 2017 at 9:55 AM, Jagan Teki <[email protected]> wrote: > + ML > > On Wed, Mar 1, 2017 at 6:23 PM, Jagan Teki <[email protected]> wrote: >> Hi Peng and All, >> >> I'm trying to boot from SD, on imx6qplus sabre board. >> >> - SW6: D1-D8 => 0100 0010 >> - SD card on SD3 >> - D12 with USB-to-Serial 115200 8N1 >> - Power supply Output 5V >> >> Build: >> $ make mx6qpsabreauto_defconfig; make >> $ dd if=u-boot.imx of=/dev/sda bs=512 seek=2
I don't have a imx6qp sabresd board handy, but can you try the SPL config instead? make mx6sabresd_spl_defconfig dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync It worked for me the last time I tried it with mainline U-Boot. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/listinfo/u-boot
