On 07/20/2017 02:16 PM, Bin Meng wrote: > Hi Marek, > > On Thu, Jul 20, 2017 at 7:12 AM, Bin Meng <[email protected]> wrote: >> This series is the final series of the xHCI driver update. >> >> This adds the missing interrupt transfer support to xHCI driver, so >> that devices like USB keyboard that uses interrupt transfer when >> CONFIG_SYS_USB_EVENT_POLL is defined can work. >> >> This also adds full speed device support. Unlike low/high/super speed >> devices, full speed device may report its endpoint 0 max packet size >> as 8/16/32/64. xHCI driver guesses 64 for the first attempt to get the >> initial 8 bytes device descriptor, and later adjusts the context for >> endpoint 0. >> >> This series also made several updates to xHCI driver to conform with >> the spec. >> >> Previous two series: >> [1]: usb: xhci: Fix USB xHCI support on Intel platform >> https://lists.denx.de/pipermail/u-boot/2017-June/296166.html >> [2]: usb: hub: Support USB 3.0 hubs >> https://lists.denx.de/pipermail/u-boot/2017-June/296284.html >> >> This series is available at u-boot-x86/xhci-working3 for testing. >> >> Changes in v3: >> - rebase on u-boot-usb/master >> - add changes to poplar.h >> >> Bin Meng (13): >> usb: xhci: Add interrupt transfer support >> usb: configs: Clean up CONFIG_SYS_USB_EVENT_POLL_(xxx) in board >> configs >> usb: kbd: kconfig: Set a default polling mechanism for USB keyboard >> usb: Only get 64 bytes device descriptor for full speed devices >> usb: Read device descriptor after device is addressed for xHCI >> usb: xhci: Fix max packet size for full speed device endpoint 0 >> usb: hub: Clear port reset before usb_hub_port_connect_change() >> usb: hub: Clear BH reset status change for a 3.0 hub >> usb: Handle audio extension endpoint descriptor in usb_parse_config() >> usb: xhci: Honor endpoint's interval >> usb: xhci: Program max burst size for endpoint >> usb: xhci: Set 'Error Count' to 0 for isoch endpoints >> usb: xhci: Set 'Average TRB Length' to 8 for control endpoints >> > > This is the last xHCI series I have. Can you please take a look and apply?
I'd like to see some RB/TB from Stefan Roese first if possible. -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
